Featured in this selectionTeewing · Lights & Electrical
$12.50× 4Klarna · Afterpay
Lights & Electrical
Replacement lights, wiring harnesses and electrical assemblies for electric scooters, listed by the exact models they fit. Filter by “Fits brand” and “Fits model” to see only the parts for your ride, then confirm the fit list on the product page before ordering.
Starting at$1
Or pay over time with Affirm, Klarna or Afterpay.
Brands30+
Free shipping to the lower 48.
ShippingFree
To the lower 48 states.
Ships in1–2days
Order by 2 PM ET on a business day.
- Free shipping to the lower 48
- Order by 2 PM ET, ships in 1–2 business days
- Pay over time with Affirm, Klarna or Afterpay
Finding the right part
Your model name and version are printed on the electric scooter and on your order confirmation. Match both to the fit list on the product page. Where the maker publishes a part number, we show it; if you have the old part in hand, compare the connector type and pin count as a final check.
Lights
Front lights bolt to the stem or headtube and plug into the harness. Check that the replacement matches your model’s connector and mounting holes. If the light flickers rather than failing outright, check the connector first; a loose plug is the usual cause.
Wiring harnesses and assemblies
An assembly line or harness carries power and signals between the controller, display, throttle, brake sensors and lights. Replace it if a wire is chafed, a connector is damaged or a section has been cut. Photograph the routing before you remove the old harness so the new one follows the same path.
Fitting safely
Switch the electric scooter off and disconnect the battery before touching any electrical connector. Route wires away from the folding joint and steering column so they cannot pinch, and test every function before the first ride. Never force a connector: if it does not click home, check the orientation and pin count against the old part, because a mismatched plug can short the controller.
Diagnosing before you buy
A dead light is not always a dead light. Check the connector at the light and at the controller, look for a chafed wire where the harness passes the folding joint, and confirm the display still switches the light on. If the light works intermittently, the harness is the likelier fault; if it never works and the connector is sound, the light unit is. Buying the right part first saves a second order.
Questions
Asked and answered
Will this light fit my electric scooter?
Only if your model and version are on the fit list. Check the product page and, if you are unsure, compare the connector and mounting with your existing light.
Do I need tools to replace a light?
Usually a hex key or screwdriver for the mounting screws; the connector simply unplugs. The product page notes anything model-specific.